1. Checking your blood sugar, step-by-step.

    Set up your meter

    Setting your date and time will help you accurately track all of your readings.

    Follow the steps below to see how to set up your meter.

    Turn on your meter
    Turn on your meter

    Turn on your meter.

    HOLD the OK button until the start-up screen appears.

    Set the time

    Set the time

    The hour will flash. Click the up or down button and press OK to confirm. Then set minutes, AM/PM, year, month and day using the same process.

    You’re ready to check!

    You’re ready to check!

    Your meter is ready when the screen with 3 dashes appears.

      Prepare your lancing device

      Before you check your blood sugar, let’s get everything ready. 

      Wash hands

      Wash hands

      Use warm soapy water. Rinse and dry completely. Contaminants on the skin may affect readings. 

      Prep your lancing device

      Prep your lancing device

      Be sure to use a new lancet for each blood check.

      Remove lancing device cap
      Remove lancing device cap

      Remove lancing device cap

      Lightly twist the cap at the end of the lancing device and pull it straight off.

      Insert lancet and remove protective cover
      Insert lancet and remove protective cover

      Insert lancet and remove protective cover

      Push in a new lancet and twist to remove the protective cover. Save the cover for later.

      Replace lancing device cap
      Replace lancing device cap

      Replace lancing device cap

      Place the white cap back on the lancing device.

      Adjust lancet depth
      Adjust lancet depth

      Adjust lancet depth

      1 is the most shallow setting, 7 is the deepest. You may want to turn the green wheel to 4 for your first test. Then adjust in half setting increments from there.

      Cock device
      Cock device

      Cock device

      Pull slider until it clicks. If it doesn’t, it’s probably already cocked.

      Want more details? Refer to the Owner’s Booklet that came with your meter or click to read here.

        Check your blood sugar

        Before checking your blood sugar, read the steps below.

        Use a new test strip

        Use a new test strip

        Remove a new test strip from the test strip vial, and tightly re-close the vial cap immediately to protect the remaining strips.

        Insert test strip
        Insert test strip

        Insert test strip

        Hold your meter with the screen facing you. Gently insert the strip with the green side facing you and the contact bars on the bottom. 
         

        You’ll see a flashing drop on the meter screen indicating the test strip has been inserted correctly and is ready to receive a sample.

        Lance finger
        Lance finger

        Lance finger

        Massage your finger to get the blood flowing. Then lance the side of your fingertip by pressing the green button.

        Form a round drop of blood
        Form a round drop of blood

        Form a round drop of blood

        Squeeze your fingertip so the blood drop forms. Be sure to get a large enough drop to help prevent an error in your reading. If it smears, runs or dries, lance in a new location.

        Apply to test strip
        Apply to test strip

        Apply to test strip

        Apply blood drop to the visible channel on either side of the test strip, NOT the top.  
         

        IMPORTANT: After you insert the test strip, you have 2 minutes to apply the blood before your meter will automatically turn off. If this happens, press and hold the OK button to turn it back on and wait for the flashing drop to reappear before applying blood to the strip.

        View Your Reading

        View Your Reading

        A 5-second countdown will begin. Your reading will appear along with a ColourSure® arrow that will make it easy to tell if you’re high, low or in-range. The meter will store your 500 most recent readings.       
         

        Get an error code (ER)?          
        Don’t worry! Click the button to find your error code in the owners booklet and see how to continue with a successful reading.       

        SEE Owners Booklet

        Remove used lancet
        Remove used lancet

        Remove used lancet

        To safely remove the lancet, remove the lancing device cap and place the protective lancet cover flat on a hard surface. Push the lancet tip into the side of the cover.

        Eject the lancet
        Eject the lancet

        Eject the lancet

        Push the slider forward to eject the used lancet. 
         

        You’ve just completed your first reading! Keep scrolling to download the OneTouch Reveal® app to get more insights into managing your diabetes.

        Want more details? Refer to the Owner’s Booklet that came with your meter or click to read here.

        1. Download & connect the OneTouch Reveal® app

        This step is recommended. Automatic log-book tracking. Connection with your healthcare team. More insights into your health. Use the OneTouch Reveal® app to get the most from your meter.

          Download OneTouch Reveal® and create an account

          Follow the steps below to see how to download the OneTouch Reveal® app and create your account.

          Onetouch APP Monogram Reveal

          Download OneTouch Reveal® 

          Scan the QR code using your phone’s camera, and tap the yellow link that appears to download the app. Or search for “OneTouch Reveal” in your phone's app store.

          Onetouch Provided QRCode
          Onetouch APP Monogram Reveal

          Download OneTouch Reveal®

          Click here to download from Google Play

          Get It On Google Play

          Click here to download from App Store

          Download on the App Store
          Reveal mobile app screen on phone

          Open the app and create your account

          Find the app on your phone and tap to open. 


          The first time you open the app, it will automatically walk you through the steps to set up your account, like entering your email and creating a password. 

          Want more details? To read more detailed instructions, click below.

          APPLE SMARTPHONE         
          How to create your account 

          ANDROID SMARTPHONE       
          How to create your account

            Pair your meter with the OneTouch Reveal® app

            Once you download the OneTouch Reveal® app, you must pair it with your meter. This allows the app to record your readings to give you personalized insights.  

            Follow the steps below to pair your meter with the app. 

            Open the app and pair your meter

            Open the app and pair your meter

            The first time you use the app and sign in, it will prompt you to select your meter and pair it with the app. Follow the instructions in the app to pair the meter.

            If you have already used OneTouch Reveal®, you can add an additional meter by selecting MORE from the home screen, selecting “My Meters” and “Add a meter”.   

            Pairing is complete!

            Pairing is complete!

            When complete, the app will display the result of previous blood sugar readings.          
             

            Pairing not complete? Don’t worry, you can restart pairing using these steps:

             

            1. In the OneTouch Reveal® app, go to the MORE menu and select MY METERS.         
             

            2. Tap “Pair Another Device.”         
             

            3. Follow the walk-through in the app to pair the meter.            
             

            SEE IPHONE PAIRING STEPS SEE ANDROID PAIRING STEPS

            1. Get the most from your meter

            Sign up for OneTouch® newsletters to get product updates, tips, education and inspiration for managing your diabetes.  Delivered to your inbox, without overloading it. 

            SIGN UP FOR EMAILS

            * required

            CAPTCHA
            OneTouch Monogram Rebrand

            Still looking for answers?   
            Get support via Live Chat during business hours.

            PREVIOUS

            US-VFX-2300016 (24-101)